Panasonic ANUJ3000, User Manual

Page: 51 / 69

External control
41
4. Using the operation setting screen
[Settings 1]
1) Set UJ – Selects Type from 0 to 7 (does not switch CH selection).
*During Type selection Type Change is highlighted.
・
Read Reads the current Type setting from UJ35 controller into computer.
・
Write Uploads current Type from computer to UJ35 controller.
・
Cancel Cancels current Type setting operation and return to start.
2) “Switch Display”… Switches the display mode of the controller.
*Settable only when UJ35 controller is online.
• “% / SEC”
For display of irradiation intensity and time.
• “TEMP” For display of head temperature.
• “×100hrs” For display of lifetime setting and cumulative irradiation time.
3) “INTERLOCK”… Locks and unlocks the UJ35 controller settings.
*Settable only when UJ35 controller is online.
• [INTERLOCK OFF]
Switches interlock off (state on UJ35 controller side)
• [INTERLOCK ON] Sets interlock ON (highlighted on screen) (state on UJ35 controller side)
• ON/OFF Toggles UJ35 controller interlock ON and OFF