2-23
3-14. A/C Head Tilt Adjustment
SPEC
curl does not appear on tape edge
Lower limit at T3 post
ADJ.
SCREW A, G (A/C Head)
MODE
PLAY
TAPE
Blank tape (The long time correspond
model use long time recorded tape)
TOOL
VFK1148, VFK1178 (Hex Driver)
1. Play back the tape and adjust screw (A) for
adjustment of tilt of A/C Head so that the tape
path has lower limit without curl at T3 post.
2. To adjustment, loosen the screw (G) and make
curl on tape at lower flange of T3 post by screw
(A). And tighten screw (A) accordingly for find the
point of curl disappeared. After finish adjustment
for screw (A), tighten the screw (G) is tightened
with 10cN-m (1.0Kg/cm) of torque.
NOTE :
1. In case of turn clockwise screw (A).
→
Tape goes up at T3 post.
In case of turn counter-clockwise screw (A).
→
Tape goes down at T3 post.
2. When screw adjustment finished, with each
adjustment screw on A/C Head should be
finished tighten direction. And confirm that the
screw does not loosen.
3. Adjust and confirmation should be performed
alternately with each A/C head adjustment
(Azimuth and Height).
3-15. A/C Head Height Adjustment
SPEC
See below
TEST
POINT
CUE AUDIO : CTL:
Refer to item “2. Table of Test Point”
ADJ.
SCREW B, H (A/C Head)
MODE
See below
TAPE
NTSC : VFM3580KM or VFM3580KL
(14 to 22min)
PAL : VFM3680KM or VFM3680KL
(14 to 22min)
TOOL
VFK1150 (Nut Driver)
VFK1190 (Hex Wrench)
(Classified list for height)
TYPE
Model
A
AJ-D440, AJ-D450, AJ-D640, AJ-D650,
AJ-D750, AJ-D850
B
AJ-D200, AJ-D210, AJ-D215, AJ-D400,
AJ-D700, AJ-D700A, AJ-D800, AJ-
D800A,
AJ-D810, AJ-D810A, AJ-D610
C
AJ-D220, AJ-D230, AJ-D230H, AJ-D250,
AJ-LT75, AJ-LT85
D
AJ-DE77, AJ-D780
E
AJ-D940, AJ-D950, AJ-D950A
F
AJ-D90, AJ-D900W, AJ-D900WA,
AJ-D910WA, AJ-PD900W, AJ-PD900WA
G
AJ-D92, AJ-D94, AJ-D95DC
(Classified list of specification)
TYPE
Spec. for CUE
Spec. for CTL
A, D, E
C1, C2
≥
1.8 V
B, F
A = Amax
C1, C2
≥
220 mV
C, G
C1, C2
≥
160 mV
(VTR mode)
TYPE
VTR mode
A, B, C
PLAY
D
FWD X1.0 (SHTL)
E, F, G
25M mode PLAY
Summary of Contents for AJD440 - DVCPRO PLAYER
Page 17: ...2 1 1 Name of Tape Transportation ...
Page 103: ...3 27 2 3 SERVO P C Board Type C D Model ...
Page 104: ...Printed in Japan F20009912NMH ...