Panasonic AJ-PX230 Series, Operating Instructions Manual

Page: 76 / 169

– 76 –
Chapter 4 Shooting — Convenient shooting functions
Convenient shooting functions
Low angle shooting
When shooting at low angles, releasing the hold cover on the REC button on the handle from the <HOLD> position will allow shooting with the REC
button on the handle.
f
To prevent accidental operation of the REC button on the handle when it is not in use, keep the hold cover to the <HOLD> position.
Scan reverse shooting
Set [ON] in the main menu → [SYSTEM MODE] → [SCAN REVERSE] to display and record the image in vertically or horizontally reverse.
Zebra patterns display
The camera can display two types of zebra patterns.
Press the <ZEBRA> button displays the zebra pattern that is set in the menu.
The level for zebra pattern display can be set in the main menu
→ [DISPLAY SETUP].
Item Description of settings
[ZEBRA1 DETECT] Sets the extraction level of zebra pattern 1.
[0%]…[109%]
f
Factory setting: [70%]
[ZEBRA2 DETECT] Sets the extraction level of zebra pattern 2.
[0%]…[109%]
f
Factory setting: [85%]
[ZEBRA2] Sets on/off of zebra pattern 2 and selects the type.
[ON], [SPOT], [OFF]
f
Factory setting: [SPOT]
[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.
[ZEBRA2]
Image level
[ON] [OFF] [SPOT]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
Displaying the center marker
Displays when setting an item other than [OFF] in the main menu → [DISPLAY SETUP] → [CENTER MARK].
@ @ NOTE
t
The center marker display is not displayed in the video from the <SDI OUT> and the <HDMI OUT> terminals.
Displaying the safety zone marker
The items you select the main menu → [DISPLAY SETUP] → [SAFETY MARK] are displayed.
The size of the safety zone marker can be changed in the main menu → [DISPLAY SETUP] → [SAFETY AREA].
@ @ NOTE
t
The safety zone marker display is not displayed in the video from the <SDI OUT> and the <HDMI OUT> terminals.