Panasonic AJ-PX230 Series, Operating Instructions Manual

Page: 158 / 169

– 158 –
Chapter 9 Maintenance — Warning system
Display Description Behavior and cause
[LACK OF CAPACITY!] There is not enough recording capacity left on the card. Insert a card with sufficient recording capacity.
[MISSING CLIP!]
The shot marks cannot be attached to the clips unless
all clips recorded across multiple microP2 memory
cards are present.
Insert all the microP2 memory cards which contains
recording across multiple cards.
[NO CARD!]
The microP2 memory card or the SD memory card is
not inserted.
Insert the relevant media.
[NO COPY TO SAME CARD!]
A clip cannot be copied to the card storing the original
clip.
Copy the selected clip to a card that does not contain
the original clip.
[NO FILE!] The specified file does not exist. Check the file.
[NO INPUT!] No data is entered. Enter data and then set.
[NO SD CARD!] No SD memory card. Insert an SD memory card.
[NOT SELECTED!] Attempted to delete without selecting clips. Select clips to delete.
[SAME CLIP IS SELECTED!]
Multiple instances of the same clip (copies) are included
in the clips selected.
Multiple instances of the same clip (copies) cannot be
copied simultaneously. Remove instances of the same
clip from selected items.
[TOO MANY CLIPS!] Too many clips are selected. Reduce the number of selected clips.
[UNKNOWN CONTENTS FORMAT!]
This is a warning of the contents for the version that is
not supported by the camera.
Match the device and content versions.
[UNKNOWN DATA!]
The metadata character code is invalid.
The metadata character code is UTF-8. Enter valid
characters using a viewer.
There is a problem with data in the file. Create the file again.
[USER CLIP NAME MODIFIED!]
When adding a counter value to the clip name,
characters must be deleted.
For the counter addition setting, the user clip name plus
the counter value can only contain up to 100 bytes.
Characters in the clip name are automatically deleted
when the total number of characters exceeds this limit.
[WRITE PROTECTED!]
The microP2 memory card or the SD memory card is
write-protected.
Insert write-accessible media.
During soft keyboard operation
Display Description Behavior and cause
[AUTHENTICATION ERROR!] Manual authentication failed. Enter the correct password.
[CANNOT CHANGE!]
An attempt is made to enter the [PERSON] item (user
who enters the memo) when there is no text memo.
Enter the [TEXT] (text information) first.
[CANNOT SET!]
[INVALID VALUE!]
The entered value is invalid. Change the input value.
[CANNOT SET!]
[NO INPUT!]
There is not input to the software keyboard. Enter the password.
[CANNOT SET!]
[RETRY PASSWORD IS DIFFERENT!]
The re-entered password is different. Enter the correct reference password.