Panasonic AGVP320 - DVD/VCR DECK Operating Instructions Manual Download Page 24

Page: 24 / 64

Selection Order

SELECT

WEEKLY

(SA)

WEEKLY

(MO)

WEEKLY

(SU)

DAILY

Timer Recording

Press PROG*

to display Program.

Press PROG

to end programming.

3) Set remaining items,

press SET

to set START/ STOP
times, CH (channel) or
LINE input (p. 35), and
tape speed (SP, SLP).
Then

press

to select.

To Enter More Programs,
press

to select and

press SET

to set an unused program
number, and then repeat
step 2.
Or

Press PROG

to exit.

All connections are made. (pp. 12 ~ 15)
TV and DECK are plugged in.
Clock set correctly. (p. 18)
Tape has record tab intact. (p. 6)
Remote is in VCR mode. (Press VCR.)
(

➛

The VCR mode Light-up Indicator lights on DECK.)

Sufficient tape remaining for recording time.

• When timer is set, the TIMER Light-up Indicator lights on DECK.
• When timer recording starts, the VCR REC Light-up Indicator lights on

DECK.

• You can set Timer Recording with the power on or off.

• “TIMER REC WILL START SOON”

appears on-screen for 2 minutes before

Timer Recording starts. If DECK is in DVD mode, no message appears, but
the VCR REC Light-up Indicator will flash.

VCR

SET

SELECT

ADD/DLT

POWER

PROG

Light-up Indicators

1) Press .
2) Set record DATE,

press

to select:

1~31= one time, or
DAILY=Monday~Friday,
or WEEKLY= same time
each week.

• See selection order left.

VCR REC Indicator

VCR mode Indicator

TIMER Indicator

Ready Checklist

Example

Today

Summary of Contents for AGVP320 - DVD/VCR DECK

































































Search results

Summary of Contents for AGVP320 - DVD/VCR DECK

Reviews:

Related manuals for AGVP320 - DVD/VCR DECK

Brands by name

Popular brands

Panasonic AGVP320 - DVD/VCR DECK, Operating Instructions Manual

Search results

Summary of Contents for AGVP320 - DVD/VCR DECK

Reviews:

Related manuals for AGVP320 - DVD/VCR DECK

Brands by name

Popular brands