Panasonic AGVP320 - DVD/VCR DECK, Operating Instructions Manual

Page: 16 / 64

16
Before doing Initial Setup
See connections RF Coaxial Cable Connection and AV Cable Connection on
page 12.
<RF Coaxial Cable Connection>
Ö Set TV to channel 3.
<AV Cable Connection>
Ö Set TV to VIDEO.
[DECK
➛ ➛
➛ ➛
➛
TV]
• Go to “Initial Setup (Ready to Play).” (See below.)
[Cable Box
➛ ➛ ➛ ➛ ➛
DECK
➛ ➛ ➛ ➛ ➛
TV], [DSS
➛ ➛ ➛ ➛ ➛
DECK
➛ ➛ ➛ ➛ ➛
TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone.
• If you use a DSS Receiver, it must be turned off.
2
1
3
Press VCR on remote for VCR mode.
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel and
clock set starts.
• If screen below does not appear, check DECK - TV connection and, if TV is tuned to channel 3, try
switching it to channel 4.
• To change VCR’s output channel, please see “VCR’s Output Channel” on page 19.
Plug VCR Power plug into an AC wall outlet.
Initial Setup (Ready to Play)
2
1
• Function buttons are void during Initial Setup.
• To eject a tape during Auto Set, press EJECT on remote or
STOP/EJECT twice on DECK.
Then make settings manually. (See p. 18.)
• If Auto Clock Set takes more than 30 minutes, press STOP
and perform settings manually. (See p. 18.)
Continued on next page...
Initial Setup for Basic Connections (Ready to Play)
Turn TV on.
Notes