Panasonic AGVP320 - DVD/VCR DECK Operating Instructions Manual Download Page 20

Page: 20 / 64

Playback/ Record on a Tape

All connections are made. (pp. 12 ~ 15)
TV and DECK are plugged in.
TV is on and tuned to CH 3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR.)
(

➛

The VCR mode Light-up Indicator lights on DECK.)

Playback a Tape

• These features work best in SP or SLP

mode.

• The sound will be muted.
• To reduce picture noise, see “Manual

Tracking Control” on page 4.

• After 3 minutes in Still or Slow mode, VCR

stops to protect the tape and the video
heads.

Playback using DECK buttons

Press PLAY.

Light-up Indicators

■

Press STOP/EJECT to stop
and/ or eject a tape.

DVD

EJECT

REW/
SLOW-

FF/
SLOW+

PLAY

PAUSE/
STILL

STOP

REC

SPEED

Insert a tape.

• DECK power comes on. If Auto VCR/TV (see p. 34)

is set to “OFF,” press VCR/TV on the remote for
VCR mode.

• If tape has no rec. tab (p. 6), auto play begins.
• The PLAY Light-up Indicator lights on DECK.

Special Features During Play

Press PLAY*

to play a tape.

■

Forward/Reverse Scene Search

➛

Press FF/SLOW+

REW/SLOW-

➛

Press PLAY

to release.

After search has begun, each additional press of

FF/SLOW+

REW/SLOW-

changes speed as

shown below.
[SP]

: Approx. 5×

↔

Approx. 7×

[SLP] : Approx. 11×

↔

Approx. 21×

• Picture interruption may occur with some TVs.
• FF and REW search speed may vary depending on

current tape position.

• After 10 minutes in search mode, VCR returns to Play

mode to protect the tape and the video heads.

■

Press REW/SLOW-

FF/SLOW+

in Stop

mode to rewind or fast forward a tape.

■

Press EJECT

on remote, or

STOP/EJECT

DECK to eject a tape.

Press STOP

to stop a tape.

■

Still (Freeze) Picture

➛

Press PAUSE/STILL

➛

Press PLAY

to release.

■

Frame by Frame Picture

➛

Press PAUSE/STILL

in Still mode.

➛

Press PLAY

to release.

■

Slow Motion Picture

➛

Press FF/SLOW+

(increase speed) or

REW/

SLOW-

(decrease speed) in Still mode.

➛

Press PLAY

to release.

Ready Checklist

Notes

Insert a tape.

VCR/TV

VCR

Notes

S-VHS Quasi Playback (SQPB)

• Tapes recorded in S-VHS can easily be played back

using the same procedure as with VHS tapes.

• This VCR automatically distinguishes between S-VHS

and VHS tapes and plays them back.

• Picture quality will be normal VHS, not S-VHS and

picture noise may occur. (Color loss or picture
disruption during Search, Pause, etc. is normal.)

• S-VHS recording is not possible.

Summary of Contents for AGVP320 - DVD/VCR DECK

































































Search results

Summary of Contents for AGVP320 - DVD/VCR DECK

Reviews:

Related manuals for AGVP320 - DVD/VCR DECK

Brands by name

Popular brands

Panasonic AGVP320 - DVD/VCR DECK, Operating Instructions Manual

Search results

Summary of Contents for AGVP320 - DVD/VCR DECK

Reviews:

Related manuals for AGVP320 - DVD/VCR DECK

Brands by name

Popular brands