Panasonic AGM1CSEC16P, Reference Manual

Page: 104 / 126

11.3.6 Input Specifications of the Analog Input Unit
■
Input specifications
Item Specifications
No. of input points 8 ch
Input range
(resolution) Voltage -10 to +10 V DC (Resolution: 1/64,000)
0 to +10 V DC (Resolution: 1/32,000)
-5 to +5 V DC (Resolution: 1/64,000)
0 to +5 V DC (Resolution: 1/32,000)
+1 to +5 V DC (Resolution: 1/25,600)
(Note 1)
Current 0 to +20 mA (Resolution: 1/32,000)
+4 to +20 mA (Resolution: 1/25,600)
(Note 1)
Conversion speed 50 μs/ch
Exceeding the rated range Possible to output up to the rated value ± 2%
With the 0 to 20 mA range, the lower limit is not supported for exceeding the
rated range.
(Note 2)
Total accuracy ±0.2%F.S. or less (at +25 ℃ )
±0.4%F.S. or less (at 0 to +55 ℃ )
Input impedance Voltage input: Approximately 1 MΩ; current input: Approximately 250 Ω
Absolute max. input Voltage input: -15 V to +15 V; current input: -30 mA to +30 mA
Insulation method Between input terminals and internal circuit: Photocoupler and isolated
DC/DC converter
Between channels: Non-insulated
Execution / Non-execution
channel settings Possible to make non-converted channel settings.
Input range selection Possible to make settings on a channel-by-channel basis
Average
processing Number of
averaging
times Setting range of 2 to 60,000 times
Time
average Time setting range of 1 to 1,500 ms
Moving
average Setting range of 2 to 2,000 times
Offset / Gain settings A desired value within the digital output range can be set for the offset
value.
Setting range: -3000 to +3000
A desired value within the digital output range can be set for the gain value.
Setting range: +9,000 to +11,000 (90% to 110%)
Scale conversion settings A desired value within the digital output range can be set for the scale
conversion setting value.
Setting range: -32768 to +32767
Upper limit / lower limit
comparison Output if the value is outside the preset upper limit or lower limit.
Setting range: -32768 to +32767
Max. / Min. hold Holding max. / min. values sampled
11.3 Specifications of Expansion Units
11-18 WUME-GM1H-02