Panasonic AGM1CSEC16P, Reference Manual

Page: 105 / 126

Item Specifications
Disconnection detection Disconnection detection is possible for the following ranges. Possible to
select auto or manual resetting
● 1 to 5 V range (Detection level: 0.7 V or less)
● 4 to 20 mA range (Detection level: 2.8 mA or less.)
(Note 1) The full scale (F.S.) on the accuracy of an analog voltage input range from +1 to +5 V and that of an
analog current input range from +4 to +20 mA are 0 to +5 V and 0 to +20 mA, respectively.
(Note 2) When a value exceeding the rated value ±2% is set, the output is rounded to a value equivalent to the
rated value ±2%.
11.3.7 Output Specifications of the Analog Output Unit
■
Output specifications
Item Specifications
No. of output points 4ch
Output range
(resolution)
(Note 1)
Voltage -10 to +10 V DC (Resolution: 1/64,000)
0 to +10 V DC (Resolution: 1/32,000)
-5 to +5 V DC (Resolution: 1/64,000)
0 to +5 V DC (Resolution: 1/32,000)
+1 to +5 V DC (Resolution: 1/25,600)
Current 0 to +20 mA (Resolution: 1/32,000)
+4 to +20 mA (Resolution: 1/25,600)
Conversion speed 50 μs/4ch
Exceeding the rated range Possible to output up to the rated value ± 2%
With the 0 to 20 mA range, the lower limit is not supported for exceeding
the rated range.
(Note 2)
Total accuracy ±0.2%F.S. or less (at +25 ℃ )
±0.4%F.S. or less (at 0 to +55 ℃ )
Output impedance (voltage output) 0.5 Ω or less
Maximum output current (voltage
output) 10 mA
Output allowable load resistance
(current output) 500 Ω or less
Insulation method Between output terminals and internal circuit: Photocoupler and isolated
DC/DC converter
Between channels: Non-nsulated
Conversion execution / non-
execution channel settings Possible to make non-converted channel settings.
Clipping function Upper and lower output limits can be set for digital input values.
Setting range: -32,640 to +32,640
Scale conversion settings A desired value within the digital input range can be set for the scale
conversion setting value.
Setting range: -32768 to +32767
11.3 Specifications of Expansion Units
WUME-GM1H-02 11-19