Panasonic AGHVX200P - MEMORY CARD CAMCORDER Operating Instructions Manual Download

Page: 18 / 134

Adjusting the hand strap

Adjust the hand strap to suit your hand.

Open the cover and adjust the length.

Close the cover.

• Make sure the cover is fully closed.

Attaching the shoulder strap

Attach the shoulder strap and use it as a precaution against dropping the camera.

20 mm or more

Detaching and attaching the lens hood

Detaching the lens hood

• Loosen the screw and turn the lens hood

counterclockwise to detach it.

Attaching the lens hood

• Turn the lens hood clockwise and ﬁ x in position

with the screw.

• Be sure to attach the lens hood cap to protect the

lens when not in use.

Screw

Summary of Contents for AGHVX200P - MEMORY CARD CAMCORDER







































































































































Search results

Summary of Contents for AGHVX200P - MEMORY CARD CAMCORDER

Reviews:

Related manuals for AGHVX200P - MEMORY CARD CAMCORDER

Brands by name

Popular brands

Panasonic AGHVX200P - MEMORY CARD CAMCORDER, Operating Instructions Manual

Search results

Summary of Contents for AGHVX200P - MEMORY CARD CAMCORDER

Reviews:

Related manuals for AGHVX200P - MEMORY CARD CAMCORDER

Brands by name

Popular brands