Panasonic AGHVX200P - MEMORY CARD CAMCORDER Operating Instructions Manual Download

Page: 29 / 134

Shooting

AUTO

MANUAL

CAMERA

MCR

VCR

DUB

LCD side

Mode button

Mode lamp

Lock
release

REC CHECK
button

Handle START/STOP
button

Basic shooting operations (Cassette tape)

Preparing to shoot using a tape

Switch the MEDIA switch to “TAPE”.

Set the POWER switch to ON. (Page 20)

Slide the OPEN/EJECT switch in the

direction shown by the arrow to open the
cassette cover.

• The cassette holder opens automatically.
• The cassette holder will not open if the

camera is not supplied with power (AC
adapter or a battery).

Insert the cassette tape.

Press PUSH to close the cassette holder.

• Close the cassette cover only after the

cassette holder is completely in position.

TAPE

PUS

Do not operate the MEDIA switch when the power
is switched ON.
If you attempt to operate the MEDIA switch, the
message “TURN POWER OFF” will be displayed.
In this case, switch OFF the power, and then switch
it ON again.

Shooting in auto mode

Turn the POWER switch to ON. (Page 20)

• Check that the mode lamp (CAMERA) is

lighted red. If not, press the mode button.

Switch the AUTO/MANUAL switch to AUTO

to select auto mode.

• “A” appears on the viewﬁ nder and LCD

screens.

• The focus, gain, iris and white balance are

adjusted automatically.

Press the START/STOP button (Red) on the

POWER switch to start shooting.

• Press again to return to the camera to the

shooting standby mode.

• Use the handle START/STOP button to make

it easier to shoot from low angles.

TAPE

Lock
release

Summary of Contents for AGHVX200P - MEMORY CARD CAMCORDER







































































































































Search results

Summary of Contents for AGHVX200P - MEMORY CARD CAMCORDER

Reviews:

Related manuals for AGHVX200P - MEMORY CARD CAMCORDER

Brands by name

Popular brands

Panasonic AGHVX200P - MEMORY CARD CAMCORDER, Operating Instructions Manual

Search results

Summary of Contents for AGHVX200P - MEMORY CARD CAMCORDER

Reviews:

Related manuals for AGHVX200P - MEMORY CARD CAMCORDER

Brands by name

Popular brands