Editing
77
1394
1394
USB 2.0
Computer (non-linear editing/fi le transfer)
Hard disk drive (data copying)
• For details on the computer’s conditions and other factors, see page 82.
Hard disk drive
Computer
USB cable (optional)
• For a Windows computer
1394 cable (optional)
• For an Apple Macintosh computer
1394 cable (optional)
Mini-B type
4-pin type
File transfer/nonlinear editing
1394AVC transfer/nonlinear editing
1394
Computer (Windows/Apple Macintosh)
1394 cable (optional)
4-pin type
4-pin type
• When controlling this camera from a non-linear editor, cancel the thumbnail screen on the camera.
(Page 66)
• No guarantees are given for images and audio signals which are output simultaneously from the camera-
recorder while data is being transferred from a computer to the camera-recorder.
When connecting the unit to an Apple Macintosh computer
• Connect the 1394 cable after turning on the power of the Apple Macintosh computer. Otherwise, the unit
may not be mounted.
• The unit may not be recognized after the Apple Macintosh computer has been placed in the hibernation
state by its power-saving setting. In this case, disconnect the 1394 cable and then re-connect it.
If the unit is not mounted properly on an Apple Macintosh computer
• When the P2 card access lamp fl ashes orange
1.
Select [Applications]
ĺ
[Utilities]
ĺ
and start up [Disc Utility].
2.
Select a grayed-out volume among volumes of the X.X GB Panasonic disc, and click “Mount.”
• When the P2 card access lamp is off
Eject the P2 card, and insert it again. If the unit is still not mounted, disconnect the 1394 cable and then
re-connect it.
Summary of Contents for AGHVX200P - MEMORY CARD CAMCORDER
Page 133: ...Memo 133 ...
