Panasonic AG527DVDE - DVD/VCR/MONITOR, Service Manual

Page: 69 / 303

9. Turn the SCREEN CONTROL on the Flyback Transformer
clockwise carefully and stop at the point where any color is first
observed.
10. In EVR adjustment mode, select the two colors not observed in
step 9 from the following control functions (B CUT-OFF, G CUT-
OFF or R CUT-OFF) and adjust so that the horizontal line becomes
white.
For example, if the horizontal line appeared red in step 9, select
and adjust the B CUT-OFF and G CUT-OFF.
(See NOTE)
11. Press DISPLAY key on the remote control again to return for full
frame scan.
12. Select SUB BRIGHT in EVR adjustment mode and adjust so that
the picture has adequate brightness.
13. Select G DRIVE and B DRIVE in EVR adjustment mode and
adjust so that the entire screen is white.
Note:
Before pressing DISPLAY key on the remote control for collapse
scan, select the desired control function and move the shaded area
to the value.
7.3.11. SUB COLOR/SUB TINT ADJUSTMENT
Purpose :
To set the standard color phase.
Symptom of Misadjustment :
Color phase will be shifted.
Test Point :
Pin 5 of P6001 (Main C.B.A.)
69