manualshive.com logo in svg

Panasonic AG527DVDE - DVD/VCR/MONITOR, Service Manual

Share
Download
Panasonic AG527DVDE - DVD/VCR/MONITOR Service Manual Download Page 225

4

Before Using

Congratulations

on your purchase of one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring you
and your family years of enjoyment. Please fill
in the information below. The serial number is
on the tag located on the back of your unit.

Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.                 AG-527DVDE
Serial No.

Remote Control
LSSQ0302

Batteries 2 “AA”

Accessories

Battery replacement caution

• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.

1) Open the cover.

3) Close the cover.

2) Insert batteries

as marked.

Break off the tab
to protect.

Record Tab

Screw driver

Cover the hole
with cellophane tape.

To record again.

Prevent Accidental Tape Erasure

Loading the Batteries

Record/Playback Time

Only use tapes with the 

 mark in this unit.

SP (Standard Play)

2 Hours

40 Minutes

1 Hour

2 Hours

5 Hours

20 Minutes

2 Hours

4 Hours

LP (Long Play)

3 Hours

6 Hours

8 Hours

SLP (Super Long Play)

Type of Video Cassette

Tape Speed

Setting

T160

T120

T60

Summary of Contents for AG527DVDE - DVD/VCR/MONITOR
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands