Panasonic AE3000U - LCD Projector - HD 1080p, Operating Instructions Manual

Page: 40 / 60

40 -
E
NGLISH
Settings
LENS CONTROL
You can use the 2 different test patterns to adjust the
focus and zoom of the image. See “Lens shift and
positioning” on page 16.
1. Press ENTER to display test pattern 1.
Press
F G
to adjust the focus and
I H
to adjust
the zoom.
2. Press ENTER to display test pattern 2.
Press
F G
to adjust the focus and
I H
to adjust
the zoom.
3. Press ENTER to display the projected image.
You can confirm the adjustment is fit to the projected
image.
4. Press MENU or RETURN to return to the previous
menu, or press repeatedly to escape the menu
mode.
You can access the saved lens control settings instantly.
1. Select a setting from LENS MEMORY 1 - 3 .
2. Press the ENTER button to activate.
You can save and name the adjusted ZOOM/FOCUS ,
H-AREA POSITION and V-AREA POSITION settings in
memory.
1. Adjust ZOOM/FOCUS , H-AREA POSITION and
V-AREA POSITION .
2. Select the LENS MEMORY SAVE and press the
ENTER button.
3. Select the required memory setting and press the
ENTER button.
4. The confirmation screen will be displayed. Select
OK and press the ENTER button.
Indicated with
★
is in use, and
✩
is empty.
5. Name the lens memory setting.
Use
F G I H
to specify the location of the required
character to enter and press the ENTER button.
6. Repeat step 5 until you finish the text line.
You can enter up to 16 characters.
Move the cursor to ALL DELETE and press the
ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicted with the cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press
G
then perform step 5.
7. Select OK and press the ENTER button to set the
entered text as a name.
NOTE:
• The saved lens memory adjustment accuracy is not
guaranteed.
• If the memorized ZOOM/FOCUS adjustment is not
accurate enough, adjust the ZOOM/FOCUS menu
again.
• If the power supply is stopped while loading or saving
the lens memory, saved adjusted settings may differ
from the original after restart the projector. Adjust the
ZOOM/FOCUS menu again.
ZOOM/FOCUS
NOTE:
• When the projector and/or the screen is tilted, adjust
the focus at the center of the image. The upper and
lower edge might be out of focus.
• When the image is distorted in keystone, adjust the
KEYSTONE in POSITION menu. See “KEYSTONE” on
page 39.
Remote control Control panel
See “Navigating through the MENU” on page 29.
See “Main menu and sub-menu” on page 30.
RETURN FOCUS
ZOOM
ENTER
RETURN FOCUS
ZOOM
ENTER
LENS MEMORY LOAD
NOTE:
• The option that contains no saved adjustment will not
be displayed.
• If there is no saved setting, the LENS MEMORY LOAD
menu will not be selectable.
LENS MEMORY SAVE
NOTE:
• If you leave the text box empty and save, the
default memory number will stay as a name.
OK CANCEL
ALL DELETE
LENS MEMORY NAME INPUT