Panasonic A230 User Manual Download Page 68

Page: 68 / 377

Inspection Procedure

OCR Type A230

−

4.16 Copying a Checker

4.16 Copying a Checker

Procedure:

Set the number of the checker for the destination.

Select

Copy checker

Set the checker number for the source checker within the same type.

Note

Only checker numbers that have already been set are displayed

when you are selecting the copy source for the checker number.

If there are no source checkers, an error message saying, “No

checker for copying exists.” is displayed.

An error message is also displayed if there is not enough space

for copying.

A message saying, “Data exists in destination, OK to overwrite?” is displayed.

Select and confirm

Yes

if you want to copy or

to cancel the copying.

Summary of Contents for A230


























































































































































































































































































































































































Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands

Panasonic A230, User Manual

Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands