Panasonic A230, User Manual

Page: 271 / 377

Useful Functions OCR Type A230
15 − 3
15.1 Loading and Saving Image Data
15.1 Loading and Saving Image Data
Image data from an image captured by a camera can be saved in memory. Up to 8
screens can be saved. However, image data is only saved while the power is on, so all
data will be lost if the power is cut. A saved image can be reloaded and displayed. You
can also set and run a checker on a loaded screen (in − memory screen).
10
15.1.1
Load Image Data
Call up saved images. When image data is loaded, 8 screens are displayed.
Move the cursor over to load the desired image.
[10] IMAGE DATA
A: −−−−−−−− B: −−−−−−−− C:Esc.
1
Scan Times: 0
CA30: 0
CA31: 0
CA32: 0
2 3 4 5 6L 7 8
(1) Image reduction display area.
(2) Displays the current image.
(3) Shows the index number of the image. The smaller the number, the
older the image.
(4) This “L” marking will appear if the lock is set on the image.
(5) Shows the number of scans when the highlighted image was saved.
(Will not be displayed when the cursor is highlighting the current image.)
(6) Shows the numerical calculation result CA30 when the highlighted
image was saved. (Will not be displayed when the cursor is highlighting
the current image.)