Panasonic A230, User Manual

Page: 315 / 377

Communications (Serial and Parallel) OCR Type A230
16 − 39
16.7 Char. Verif. − Character (pattern) Re − registration
Re − registration using serial input
Procedure:
1. Send the command (%O01
C
R
to %O16
C
R
) that specifies the Character
Verification checker number to be re − registered.
2. Input the re − registration input signal (IN6) for the first time (the READY signal
will go off).
Note
If the Position/Rotation Adjustment checker produces a NG result
(due to being unable to detect an edge etc.), the re − registration
processing is cancelled, and the ERROR signal goes on.
3. If a position/rotation adjustment group has been specified:
Segmentation is performed at the adjusted position, and the checker pattern
and segmented character (pattern) are displayed.
If the position/rotation adjustment group is “0”:
Character (pattern) segmentation is done at the position set when the area
was created, and the checker pattern and segmented character (pattern) are
displayed.
Note
If the Position/Rotation Adjustment checker produces a NG result
(due to being unable to detect an edge etc.), the re − registration
processing is cancelled, and the ERROR signal goes on.
4. Send the command (%O
C
R
).
5. Re − registration will be performed and the READY signal will go on when it is
complete.