Panametrics CTF878, Service Manual

Page: 26 / 67

Chapter 2.
16 Model CTF878 Service Manual
Figure 18: Flash Reloading Window
3. The meter now asks if you wish to reload the flash memory.
• Press [F3] (Yes) (or
Y
on the PC keyboard twice) to begin reloading, or
• Press [F2] (No) (or ESC on the keyboard) to stop the reloading procedure.
4. If you chose to reload flash, a message appears as in Figure 19 below. On the PC in the Hyperterminal Window,
select the “Send File” entry under “Transfer.”
Figure 19: “Ready To Receive Update” Window
5. The “Send File” window appears (see Figure 20 below). Select the replacement software (designated by a .cod
extension) from the folder where it has been stored.