Panametrics CTF878, Service Manual

Page: 24 / 67

Chapter 2.
14 Model CTF878 Service Manual
3. A
Connect To window appears (see Figure 14 below). Under Connect using select the correct communication
port. Click OK.
Note: COM1 was selected here as an example.
Figure 14: “Connect To” Window
4. The
Communication Port Properties window appears. Enter the settings shown in Figure 15 below. Click OK.
Figure 15: Communication Port Properties Window
The CTF878 is now connected to the PC. In the lower left-hand corner of the Hyperterminal window it reads
“Connected” with the connection duration (see Figure 16 below).
38400