Panametrics CTF878, Service Manual

Page: 14 / 67

Chapter 1.
4 Model CTF878 Service Manual
You have completed entering signal error limits.
•
Press [F2] (Cancel) to return to Operate Mode without confirming the error limits, or
• Press [F3] (OK) to confirm the new limits and return to Operate Mode.
1.1.6 The Test Option
Within the Service Menu, the Test option includes three tests to ensure that the CTF878 is performing properly: Test
Screen, Test Keys and Watchdog Test. To enter this option, scroll to the Test entry on the Service Menu and press
[ENTER] . The screen appears similar to Figure 5 below.
Figure 5: Test Option under Service Menu
Scroll to the desired entry in the option menu and press [ENTER] .
Units
Test
Diagnostics
Site Program Meter Logging
Signal Setup
Error Limits
Test Keys
Watchdog Test
34
0 50 100
19.25
Service
TAU, ms
Test
Test Screen
Corr SNR