Safety
Important Safety Instructions:
* Read these instructions.
* Keep these instructions.
* Heed all warning.
* Follow all instructions.
* Do not use this apparatus near water.
* Clean only with dry cloth.
* Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
* Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
* Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
* Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
* Only use attachments/accessories specified by the manufacturer.
* Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use with caution when moving the cart/apparatus combination to
avoid injury from tip-over.
* Unplug this apparatus during lightning storms or when unused for long periods of time.
* Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
* Read through this instruction manual before installation and use.
* To disconnect the power cord, hold the plug instead of pulling the cord.
* Switch off the main power when the unit is not in use. (Disconnect the power plug from the power
outlet when you do not intend to use the unit for a prolonged period of time.) Before moving the unit,
remove the disc from the unit's tray first.
* Do not open the cover or touch any of the components inside the unit.
* Do not operate or install the unit under direct sunlight or near objects that radiate heat. This may
lead to overheating of the unit.
* Do not operate or install the unit in moist or humid conditions. This may affect the pick-up of the unit.
* Install the unit on a flat surface with good air circulation. Please ensure the ventilation holes are not
covered otherwise the unit will overheat and malfunction.
* Wipe the panel and case with soft dry cloth only. Do not apply any kind of thinner, alcohol or sprays
when cleaning the unit.
