11
FOLD 72 FIRE TABLE CE Electronic Ignition | Installation & Owner’s Manual
CLEANING AND MAINTENANCE
BURNER TUBE
IGNITION PORT
PILOT ASSEMBLY
KEEP YOUR FIRE PIT COVERED
Covering your fire pit with its all-weather cover when not in use will prolong the life of
all its components.
WARNING: Turn off gas before servicing fire pit.
We recommend that a qualified service technician perform the following
check-ups at the beginning of each fire pit season.
If any irregularities are apparent with operation. Please refer to Troubleshooting guide,
pages 12-13.
BURNER ELEMENT AND PILOT
Keep the burner and pilot area clean by vacuuming or brushing at least twice a year.
Make sure the burner porting and burner air openings are free of obstructions at all
times. Remove pilot cover to inspect pilot.
Remove topping from top of burner ring and Inspect area around the burner. Remove
any lint or foreign material with a brush or vacuum cleaner.
PILOT FLAME
The flames from the pilot should be
visually checked as soon as the unit is
installed, and periodically during normal
operation. The pilot flame must always be
present when the fire pit is in operation.
The pilot flame has two distinct flames:
one engulfing the flame sensor and the
other reaching to the main burner.
FLAME SENSOR
