10
FOLD 72 FIRE TABLE CE Electronic Ignition | Installation & Owner’s Manual
LIGHTING YOUR FIRE PIT
WARNING:
This appliance is designed to be connected to a power
source that is controllable by a switch.
Do not connect 24 VAC AC adapter to a live power source.
OPERATING INSTRUCTIONS
1. STOP! Read the safety information on pages 1, 2 and 10 of this manual.
2. Turn off all electric power to the appliance.
3. Do not attempt to light the pilot manually.
4. Turn the manual gas control valve to the OFF position.
5. Wait five (5) minutes to clear out any residual gas, then check for the smell of
gas at and around the appliance, including near the floor. If you smell gas,
STOP! Follow the instructions on page 1 of this manual. If you do not smell gas,
continue to the next step.
6. Turn the manual gas control valve to the ON position.
7. Plug the supplied 24 VAC AC adapter into a 230V power outlet.
8. Connect the AC adapter to the AC input plug at the unit.
9. Place Burner Assembly in Housing
10. To ignite burner, turn on electric power to the appliance.
11. To turn off appliance, turn off electric power to the appliance.
TURNING OFF THE GAS TO THE APPLIANCE
1. Turn off all electric power supplied to the appliance if service is to be performed.
Unplug the 24 VAC AC adapter from the power outlet.
2. If necessary, remove the burner from the housing to access the manual gas
valve.
3. Turn the main manual shutoff valve to the full OFF position.
