3
BENTO 32 CORTEN FIRE PIT Electronic Ignition | Installation & Owner's Manual
BASIC ASSEMBLY
1. UNPACK: Account for all parts (see p. 14)
2. FRAGILE: Handle with care
3. LEVEL: Place on a solid, level surface
4. AIR VENTS: Do not block ventilation holes
in base (see p. 4)
5. GAS / ELECTRICAL: Supply lines are
routed through the base of the unit and
must be installed by licensed trades.
Space is tight! Keep risers as low and
compact as possible
6. MEDIA TOPPINGS: Review correct
placement (p. 6-7)
PILOT ASSEMBLY
BURNER RING
BURNER MEDIA PAN
PIPE ADAPTER
FLEX CONNECTOR
CONTROLS
BODY
CAUTION: COR-TEN STEEL is designed
to oxidize and form a protective layer
that resists corrosion. This layer can take
several months to stabilize depending on
climate and weather conditions. Rust will
bleed until it stabilizes.
Do not place Cor-Ten fire pits on surfaces
that will be permanently damaged or
stained by rust bleed.
TOPPING TRAY
