16
VM-Series
Deployment
Guide
Monitor Changes in the Virtual Environment
About the VM-Series Firewall
This example shows how to create two policies: one for all access to FTP servers and the other for access to web servers.
Step 4
Validate that the members of the dynamic
address group are populated on the
firewall.
1.
Select
Policies > Security
, and select the rule.
2.
Select the drop-down arrow next to the address group link, and
select
Inspect
. You can also verify that the match criteria is
accurate.
3.
Click the
more
link and verify that the list of registered IP
addresses is displayed.
Policy will be enforced for all IP addresses that belong to
this address group, and are displayed here.
Use Dynamic Address Groups in Policy (Continued)
