PaloAlto Networks PA-5400 Series Hardware Reference Manual Download Page 3

Page: 3 / 92

TABLE OF CONTENTS

iii

Table of Contents

Before You Begin................................................................................................5

Upgrade/Downgrade Considerations for Firewalls and Appliances............................................... 7

Tamper Proof Statement...........................................................................................................................8

Third-Party Component Support.............................................................................................................9

Product Safety Warnings........................................................................................................................10

PA-5400 Series Firewall Overview.............................................................. 15

PA-5450 Front and Back Panel Descriptions.................................................................................... 17

PA-5450 Front Panel.................................................................................................................. 17

PA-5450 Back Panel....................................................................................................................18

PA-5400 Series Firewall Module and Interface Card Information........ 21

PA-5400 Series Firewall Base Card (BC)............................................................................................ 23

PA-5400 BC-A.............................................................................................................................. 23

PA-5400 Series Firewall Management Processor Card (MPC)......................................................24

PA-5400 MPC-A...........................................................................................................................24

PA-5400 Series Firewall Networking Card (NC)...............................................................................28

PA-5400 NC-A..............................................................................................................................28

Identify PA-5400 Series NC Port Activity and Link LEDs..................................................31

PA-5400 Series Firewall Data Processor Card (DPC)......................................................................32

PA-5400 DPC-A........................................................................................................................... 32

PA-5400 Series Firewall Installation............................................................35

PA-5400 Series Firewall Equipment Rack Installation.....................................................................37

PA-5400 Series Firewall Rack Install Safety Information...................................................37

Install the PA-5450 Firewall in an Equipment Rack............................................................ 37

Install the Mandatory PA-5400 Series Firewall Front Slot Cards................................................. 44

Install a PA-5400 Series Firewall Management Processor Card (MPC).......................... 44

Install a PA-5400 Series Firewall Networking Card (NC)...................................................45

Configure Session Distribution on a PA-5400 Series Firewall..........................................46

Install a PA-5400 Series Firewall Data Processor Card (DPC).......................................... 46

Set Up a Connection to the Firewall................................................................................................... 48

Connect Power to a PA-5400 Series Firewall...................................................................................50

Determine PA-5400 Series Firewall Power Configuration Requirements......................50

Connect AC or DC Power to a PA-5450 Firewall............................................................... 50

View PA-5400 Series Firewall Power Statistics................................................................... 54

Connect Cables to a PA-5400 Series Firewall...................................................................................56

Verify the PA-5400 Series Firewall NC Configuration....................................................................57

Service the PA-5400 Series Firewall Hardware........................................ 59

Replace a PA-5400 Series Firewall AC or DC Power Supply........................................................ 61

Interpret the PA-5400 Series Firewall Power Supply LEDs.............................................. 61

Replace a PA-5450 AC or DC Power Supply....................................................................... 61

Replace a PA-5400 Series Base Card (BC).........................................................................................63

Replace a PA-5450 Base Card (BC).........................................................................................63

Replace a PA-5400 Series Firewall Fan Assembly........................................................................... 65

Summary of Contents for PA-5400 Series





























































































Search results

Summary of Contents for PA-5400 Series

Reviews:

Related manuals for PA-5400 Series

Brands by name

Popular brands

PaloAlto Networks PA-5400 Series, Hardware Reference Manual

Search results

Summary of Contents for PA-5400 Series

Reviews:

Related manuals for PA-5400 Series

Brands by name

Popular brands