PaloAlto Networks PA-5200 Seriesp, Hardware Reference Manual

Page: 16 / 60

PA-5200 Series Firewall Overview
Item Component Descripon
6 HA1-A and HA1-B Two RJ-45 10/100/1000Mbps ports for high-
availability control (HA1).
7
CONSOLE port
(RJ-45)
Use this port to connect a management
computer to the firewall using a 9-pin serial to
RJ-45 cable and terminal emulaon soware.
The console connecon provides access to
firewall boot messages, the Maintenance
Recovery Tool (MRT), and the command line
interface (CLI).
If your management computer does
not have a serial port, use a USB-to-
serial converter.
Serial Sengs
Data rate: 9600
Data bits: 8
Parity: none
Stop bits: 1
Flow control: None
8 USB port Use this port to bootstrap the firewall.
Bootstrapping enables you to provision the
firewall with a specific PAN-OS configuraon
and then license it and make it operaonal on
your network.
9 MGT port Use this Ethernet 10/100/1000Mbps port to
access the management web interface and
perform administrave tasks. The firewall also
uses this port for management services, such as
retrieving licenses and updang the threat and
applicaon signatures.
10 LED status indicators Five LEDs that indicate the status of the firewall
hardware components (see Interpret the LEDs
on a PA-5200 Series Firewall ).
11 Intake air filters Two filters for air entering the firewall.
Replace the Air Intake Filters on a PA-5200
Series Firewall every six months.
PA-5200 Series Next-Gen Firewall Hardware Reference 16
©
2021 Palo Alto Networks, Inc.