Service the PA-5200 Series Firewall
Interpret the LEDs on a PA-5200 Series Firewall
The following table describes how to interpret the status LEDs on a PA-5200 Series firewall.
LED
Descripon
Front Panel LEDs
PWR (Power)
Power Supply (with black handle)
Green—The firewall is powered on.
Off—The firewall is not powered on or an error occurred with the
internal power system (for example, power is not within tolerance
levels).
Power Supply (with red handle)
Green—The firewall is powered on.
Off—The firewall is not powered on or an error occurred with the
internal power system (for example, power is not within tolerance
levels).
STS (Status)
Green—The firewall is operang normally.
Yellow—The firewall is boong.
HA (High Availability)
Green—The firewall is the acve peer in an acve/passive
configuraon.
Yellow—The firewall is the passive peer in an acve/passive
configuraon.
Off—High availability (HA) is not operaonal on this firewall.
In an acve/acve configuraon, the HA LED only
indicates HA status for the local firewall and has two
possible states (green or off); it does not indicate HA
connecvity of the peer. Green indicates that the firewall
is either acve-primary or acve-secondary and off
indicates that the firewall is in any other state (For
example, non-funconal or suspended).
TMP (Temperature)
Green—The firewall temperature is normal.
Yellow—The firewall temperature is outside tolerance levels.
See
PA-5200 Series Environmental Specificaons
for the
temperature range.
FANS
Green—The fan trays and all fans are operang normally.
PA-5200 Series Next-Gen Firewall Hardware Reference
28
©
2021 Palo Alto Networks, Inc.