24
Loading a Recipe
9.4.1.
To load a recipe, follow these steps:
•
On the Automatic Mode scene, press Select. The Recipe Selector screen will open
•
Use the buttons on the Recipe Selector screen to load recipes and view their contents.
•
At the top of the screen, press the arrow buttons to move through the list of recipes.
•
In the lower right corner of the screen, press the
Back
and
Next
buttons to move through
the individual instructions in the selected recipe.
•
On the Recipe Selector screen, press the back button
in the upper right corner of the
screen to load the selected recipe and return to the Automatic Mode screen.
Running a Recipe
9.4.2.
To run the recipe listed on the Automatic Mode screen, press and hold the
Start
button. The
mixer will start according to the recipe’s instructions and ‘Routine in Progress’ will appear in the
menu bar. The time remaining in the recipe is listed at the bottom of the screen. The window
status bar will show a blinking ‘Routine in Progress’.
Upon finishing the recipe run the screen will show ‘Successful Finish’ with a time stamp, run
duration and name of the recipe finished. To resume to the auto mode screen, press the OK
button.
When failure mode is activated during a recipe run the job is paused automatically and can be
resumed upon failure reset. ‘Unscheduled Finish’ is displayed with a time stamp, run duration and
name of the recipe after finishing the recipe run. To resume to the auto mode screen, press the
OK button.
Aborting a Recipe
9.4.3.
Supervisors and Maintenance user levels can abort running recipes. To abort a recipe that is
currently running, press and hold the
Abort
button. When a routine is aborted the ‘Unscheduled
Finish’ screen with a time stamp, name of the recipe aborted and run duration will open. To
resume to the manual mode screen, press the OK button.
Pausing and Resuming a Recipe
9.4.4.
Supervisors and Maintenance user levels can pause and resume recipes. To a recipe that is
currently running, press and hold the
Pause
button. A blinking ‘Routine Paused’ status is
displayed in the status bar. To resume the recipe from where it was paused, press and hold the
Resume
button.
Editing a Recipe
9.4.5.
Supervisors and maintenance user levels can edit a recipes instructions.
To edit a recipe, follow these steps:
1. Press
Select
on the automatic mode screen. The recipe selector screen opens.
2. Use the arrow buttons at the top of the screen to scroll through the list of recipes until you
open the one you want to edit.
3. Press
Edit
. The Recipe Editor screen opens (Figure 28).
4. If needed, press the
Back
and
Next
buttons on the right side of the screen to scroll
through the list of instructions for that recipe.
5. Each recipe can contain up to 10 instructions
6. Set the parameters to use for a specific instruction.
