20
5. Roll the drive unit along the rails all the way until the bearings come to a stop and rest in
the notch located at the end of the rails.
Figure 21: Drive unit pushed until stop on tank rails
6. Using the drive unit handle, lift the drive unit to a horizontal position. While holding the
drive unit in this position, pivot the latch toward the tank so that the cross bar rests on the
hooks in the guide rails.
Figure 22: Lift drive unit and latch to tank
7. Once completely docked, the drive unit can be powered on by plugging the power cord in
an appropriate power socket.
Note: Tanks may not look exactly as shown, but the drive installation procedure is the same,
regardless of the tank design.
CAUTION:
Be careful to not trap fingers under the latch when locking the drive unit
onto the tank.
CAUTION:
In case of tanks on wheels, DO NOT attempt to move the tank with the
drive unit handle while it is docked. Doing so might damage the drive unit. Always use
the tank push bar to move the tank.
