Palfinger MBB C 1000 S, Operating Instructions Manual

Page: 53 / 196

53
Opening the Platform
 Loosen the platform interlock (if present).
 Turn the rotary switch (28) downward and hold it in this po-
sition until the platform has reached the horizontal operat-
ing position.
If an optional load safety device is present, the platform is
lowered and then unfolds to the horizontal operating posi-
tion.
Lowering the Platform
 Turn the rotary switch (27) upward and hold it in this posi-
tion until the platform is adjusted flush to the ground.
After the platform has touched the ground it tilts and adjusts
to the ground.
Lifting the Platform
 Turn the rotary switch (27) upward and hold it in this posi-
tion until the platform has reached the vehicle loading floor
height.
The platform tilts to the horizontal or preset position before
it is lifted.
Closing the Platform
 Turn the rotary switch (28) upward and hold it in this posi-
tion until the platform is closed.
If an optional load safety device is present, the platform
closes approximately to 80° and is lowered a small amount.
Finally, it moves to the vertical transport position and is
lifted into the load safety device.
 Close the platform interlock (if present).
Betriebsanleitung_Hubladebuehnen_EN.book Seite 53 Donnerstag, 15. August 2019 4:04 16