Palfinger MBB C 1000 S, Operating Instructions Manual

Page: 144 / 196

144
Quarterly or Semi-annual Maintenance
Lubricating the Low-maintenance Bearings
 Clean the low-maintenance bearings and, if required, the
guide rails.
 Grease the low-maintenance bearings and, if required, the
guide rails with lubricant grease.
Note: If you use the tail lift quite frequently, the low-maintenance
bearings and, if required, the guide rails must be greased
more frequently than once a year.
Moving the Tail Lift
After a standstill of more than 3 months you have to move the
tail lift several times.
 Open, lift, lower and close the tail lift using the correspond-
ing operating element.
 Repeat this procedure approximately 5 times.
Annual Maintenance
Changing the Hydraulic Oil
All Models
A B C F G K L
CAUTION!
Risk of injury or material damage through waste oil!
If you do not change the oil in the hydraulic unit once a year,
condensation water could accumulate, especially at tempera-
tures below the freezing point. This disturbs the function of
the tail lift. Persons could be injured and material could be
damaged.
 Change the hydraulic oil once every year.
 Preferably change the oil shortly before the start of the
winter season.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 144 Donnerstag, 15. August 2019 4:04 16