6
004778190 - 15/01/2020 - PN - Italy
1.2 Uso del pannello comandi
• Agendo sui tasti freccia ci si sposta tra i diversi menu che si illuminano di
volta in volta.
• Soffermandosi su una determinata funzione si possono scorrere gli eventuali
sottomenu con i tasti ; per modificare un parametro basta agire sul tasto
e modificarne i valori, sempre con i tasti . Una ulteriore pressione del tasto
conferma la modifica.
• In generale tutti i valori lampeggianti sono in quel momento modificabili con i
tasti .
• Il tasto “annulla” consente di tornare indietro di un livello nei menu; la sua
pressione prolungata permette la visualizzazione sul display di un eventuale
codice di allarme o di errore.
1.3 Parametri di funzionamento
Il funzionamento della stufa è determinato dai parametri di Potenza e Temperatura impostati
dall’utente.
1.3.1 Modifica della potenza
La potenza definisce la quantità di calore prodotta dalla stufa e quindi incide direttamente
anche sui consumi.
Per modificare la potenza portarsi con i tasti sul menu potenza .
a) Scorrere con i tasti il sottomenu;
b) selezionare il sottomenu “1” e confermare con il tasto ;
c) lampeggerà il valore di potenza; modificarne il valore con i tasti
(1 minimo,...,5
massimo);
d) premere il tasto per confermare i dati impostati.
1.3.2 Modifica della temperatura
In funzione della configurazione installativa della caldaia è possibile intervenire su diversi
valori di temperatura:
a) Portarsi con i tasti sul menu temperatura e premere il tasto ;
b) lampeggerà il valore attuale; modificarlo con i tasti ;
c) premere il tasto per confermare il dato impostato.
Temperatura acqua
(solo nelle configurazioni installative 1): variando questo valore si varia
la temperatura desiderata di mandata dell’acqua calda da parte della caldaia.
Temperatura ambiente
(solo nelle configurazioni installative 2): modificando tale valore si
definisce la temperatura che si desidera raggiungere in ambiente, letta direttamente da una
sonda posta sulla caldaia.
Temperatura accumulo
(solo nelle configurazioni installative 3 e 4): identifica la temperatura
minima che si desidera mantenere all’interno dell’accumulo.