78
004778190 - 15/01/2020 - PN - Italy
4.1.2 Asignar programas a los días
Con esta función es posible asignar hasta tres programas diferentes a un determinado día.
a) Actuando en las teclas de flecha ir al menú setup y presionar la tecla ;
b)
Seleccionar la contraseña “7” con la tecla
y confirmar con la tecla;
;
c) seleccionar el submenú [1] y confirmar con la tecla ;
d) elegir con las teclas y el día [d1]...[d7] al cual se quieran asociar los programas;
e) seleccionarlo con la tecla ;
f) parpadeará el valor del primer programa para asignar: P1...P6 o “OFF” para deshabilitarlo;
g) modificar el valor con las teclas y y presionar la tecla ;
h) parpadeará el valor del segundo programa para asignar: P1...P6 o “OFF” para deshabilitarlo;
i) modificar el valor con las teclas y y presionar la tecla ;
j) parpadeará el valor del tercer programa para asignar: P1...P6 o “OFF” para deshabilitarlo;
k) modificar el valor con las teclas y y presionar la tecla para confirmar los datos
configurados.
4.1.3 Habilitación / deshabilitación del timer
a) Utilizando las teclas de flecha ir al menú del Timer .
b) confirmar con la tecla ;
c) desplazar con las teclas y y seleccionar: “ON” para habilitar el timer o “OFF” para
deshabilitarlo.
d) presionar la tecla para confirmar la selección
.
Cuando el timer está habilitado aparecerá el icono fijo para indicar que el timer está activo.
4.2 Función ahorro “Eco mode”
Habilitando esta función se hace que la estufa, al alcanzar la temperatura deseada en
el ambiente, se apague. Si esta función no está habilitada, la estufa modula el propio
funcionamiento para mantener la temperatura deseada consumiendo lo menos posible.
La función ”Eco Mode” está disponible solo en la configuración 2.
Para habilitar/deshabilitar esta función:
a) Actuando en las teclas de flecha ir al menú setup y presionar la tecla ;
b) Seleccionar la contraseña “7” con la tecla
y confirmar con la tecla; ;
c) seleccionar el submenú [7] y confirmar con la tecla .
d) configurar con las tecla
y uno de los siguientes valores:
Eco
→
Habilita la función "Eco Mode"
Off
→
Deshabilita la función "Eco Mode"
e) presionar la tecla para confirmar los datos configurados.
4.3 Reencendido luego de black-out
En caso de interrupción de la corriente eléctrica, la estufa se encenderá de nuevo
automáticamente, comprobando las condiciones de seguridad, cuando se retome la
alimentación.