27
004778190 - 15/01/2020 - PN - Italy
ENGLISH
3
Using the stove
3.1 Power on
Before each ignition, make sure that the burn pot is completely empty and correctly
positioned in its seat.
The set values will be maintained until the next change, even with the stove off or
disconnected from the power supply.
To switch on again, it is advisable to wait for the stove to cool completely.
Automatic ignition: the stove is equipped with an automatic device that allows pellet
ignition without the use of other traditional ignitors.
During the first ignition of the stove, unpleasant odours or fumes may be generated due
to the evaporation or drying of certain materials used. This phenomenon will gradually
disappear.
It is advisable to turn off the stove strictly following the above and always avoid doing so
by removing the power supply.
Avoid manually turning on the stove if the automatic ignition system is compromised.
After ten hours of continuous operation, the stove will perform an automatic shutdown
and restart in order to guarantee optimal cleaning of the burn pot.
To turn on the stove keep the key pressed for a few seconds.
The flame icon will start to flash, during the ignition phase until it remains fixed when the
stove is on.
During the first ignitions, it is advisable to keep the premises well ventilated.
3.2 Modifying the parameters
It is possible to change the operating parameters of the stove according to what has already
been stated.
3.3 Power off
To turn off the stove keep the key pressed for a few seconds; the flame icon will go out.