27
Palax D410 Pro+
Translation
1-2020
PowerSpeed cylinder
Normally the splitting movement is executed at the highest speed possible when the splitting
force is the lowest.
As the force requirement increases, the splitting force of the machine automatically increases.
The splitting force is increased in steps so that it can be about 4, 8 or 13 tons. The change of the
splitting force inversely affects to the splitting speed. When the force is low, the speed is high
and vice versa.
Once the log starts splitting, and the force requirement reduces, the machine switches to a lower
splitting force, and at the same time, the splitting speed will increase.
In 2/4 ways, option
A wedge for splitting the log in two or four ways.
In 2/6 ways, standard, fig 20
A wedge for splitting the log in two or six ways.
In 2/8 ways, option
A wedge for splitting the log in two or eight ways.
In 2/10 and 2/12 ways, option
A wedge for splitting the log in two or ten ( twelve ) ways. 2/10 and 2/12 wedges are not suitable
for hard wood.
Figure 19
