22
Palax D410 Pro+
Translation
1-2020
Figure 13
Lubricating the chain-saw
The machine is equipped with an automatic lubricator for saw-chain oil.
The feeding rate of the forced-action piston pump is adjustable and precise. The feeding rate
of the lubricator pump is pre-adjusted.
Filling capacity of the tank A is about 3 litres. Check the oil level regularly. The tank should
always be at least a third full with oil.
NOTE!
The oil volume is sufficient for lubricating the chain properly under normal conditions.
If you cut a lot of thick trees, it advisable to increase the oil volume. Temporarily, the
oil volume can be increased by lifting up the crosscut saw-bar and, immediately after
that, resuming the cutting operation.
Adjusting the oil volume
Turn the hexagon socket screw B in the desired direction. See the instruction decal C, Fig. 14.
Turning the adjustment screw one round in the (-) direction reduces the oil flow.
Turning the screw one round in the (+) direction, correspondingly increases the oil flow.
