28
Palax C750
Translation
1-2018
2. Fill up with about 0.5 litres of new oil; SAE 80.
20
21
9.13
Changing the hydraulic oil, Fig. 21
The normal hydraulic oil volume is 40 litres. In professional use, the oil volume is 60
litres.
The quality of oil should be ISO VG 32, e.g. Univis 32, SHELL Tellus 32, NESTE
HYDRAULI 32 or equivalent.
For continuous operation under warm conditions, use ISO VG46.
If a machine powered by electric motor is operated in temperatures below -15 degrees,
it is recommended that a less viscous hydraulic oil be used, e.g. ISO VG 22S
multigrade oil or synthetic hydraulic fluid, because a machine with electric drive works
at full speed right from the start of operation
Observe particular cleanliness during the oil change, because the flawless operation of
the machine is highly dependent on the purity of the oil.
9.14
Lubricating the machine: refer to the Maintenance Schedule
Nipples for bearings on the multi-purpose shaft, 2 pcs., Fig. 22 A.
Nipples for multi-purpose shaft, 1 pc., Fig. 22 B.
Blade beam bearings, 6 nipples, Fig. 23 A.
Spherical bearings on the operating levers for the blade, 3 nipples, Fig. 23 B.
22
A
B
23
A
B
9.15
Servicing the main valve, Fig. 24
To withstand and operate flawlessly, the detent end A, the spool shifter joint B and the
ball joint of the control valve require regular lubrication. Lubrication of the valve is
