15
Palax C750
Translation
1-2018
Pull open the lock A, Fig. 7
Swing down the top of the conveyor.
Remove the support bar B for the conveyor chain, Fig. 7, and attach it to the holes C at
the edge of the conveyor.
Put the splints back in place.
WARNING!
Always hold by the winch handle as you lower the conveyor.
2.8
Bringing the conveyor into the transport position, Fig. 4, 5, 6 and 7
Release the locks for the conveyor.
Lower the conveyor to the ground and connect the support bar B for the conveyor
chain, Fig. 7.
Pull lock A open and lift up the conveyor top.
Ensure that lock A is properly locked.
Raise the conveyor using the winch.
Tighten the winch wire lightly in order to prevent it uncoiling from the spool.
Lock the conveyor to the transport support using the lock, the chain and the pin.
6
7
B
A
C
