20
Palax C750
Translation
1-2018
4
FULLY HYDRAULIC CONTROL OF THE PALAX C750 Pro and Pro+,
Fig 13
Cross-cutting, start of the splitting and operation of the in-feed conveyor are effortlessly
controlled using the fully hydraulic joystick-valve 1, Fig.13.
4.1
Mastering the safety devices
1. The crosscut blade does not come down - close the protective net for the splitting
chute. The machine does not operate, if the protective net is open.
2. The protective net for the splitting chute cannot be opened – lift the crosscut blade to
its upper position. The protective net cannot be opened if the crosscut blade is not in
the upper position.
3. The splitting operation cannot be launched with manual control – close the protective
net for the splitting chute. The machine does not operate, if the protective net is open.
4.2
Joystick-valve, No. 1, Fig. 13
Push the joystick forward and move it in direction B – D; the conveyor feeds the log
against the log-stop.
Push the joystick forward and move it in direction B – C; the conveyor reverses.
Pull the joystick back in direction A; the saw-blade comes down and cuts through the
wood.
Push the joystick forward in direction B; the crosscut blade comes up and, at the same
time, launches the splitting.
4.3
Operating lever for the splitting wedge No. 2, Fig. 13
Pull it back, the splitting wedge lowers.
Push it forward, the splitting wedge raises.
13
1
4
3
2
B
A
D
D
