WX-1x
User Guide Version 1.3
WX-1-O Installation
1.
Place the unit in an appropriate place using the mounting kit.
2.
Run an Ethernet cable to the device and plug one end into the WX-1-O access point.
3.
Plug the other end of the Ethernet cable into a PoE+ injector or PoE+ Switch.
4.
The LED lights will begin to light up and indicate that WAP is connected.
5.
Once the WAP fully boots up, you may log into the WAP and configure the settings.
Antennas
Weather Proof RJ-45
Be sure to run the Ethernet cable through the plastic element, and seal it tightly to insure weather-
proofing.
