18
OPTIONAL:
PAINLESS PART#: 57150
–
WINCH CONTROL ADD-ON KIT
Separate from your Switch Panel wiring harness, there are 2 optional winch
control wires: a WHITE/
RED
(IN) and a
BROWN
/WHITE (OUT). These wires control
the in and out functions of a winch when they are installed.
These control wires can be connected to a on-off-on, momentary contact,
SPDT switch or a winch switch (not provided in the kit). If you do not have a winch
switch, Painless offers a Winch Control Add-on Kit (
Painless Part #: 57150
,
available online at www.painlessperformance.com). Steps 23 - 28 show you how
to install a Winch Control Add-on Kit to your Trail Rocker Switch Panel and
connect the control wires to the switch. The SPDT Wiring diagram on
page 23
will
show how to connect to a standard SPDT switch.
