2
TOOLS NEEDED
This installation primarily requires only basic hand tools that may
include, but are not limited to:
1.
7
∕
16
” combination wrench
2.
7
∕
16
” socket and ratchet
3.
Wire cutter / “dikes”
4. Wire Crimping and Stripping Tools:
This style of hand crimper can
be purchased from just about any local
auto parts store, home improvement
store or can also be purchased online.
You will need this style of crimper to
crimp the heat shrinkable and non-
heat shrinkable, insulated terminals
included in the small parts kit.
Another style of crimpers are
“Roll-Over Crimpers.” These crimpers
will crimp factory style, non-insulated
terminals. Painless offers
“Roll-Over
Crimpers
,” such as those seen to the
right, under Painless part #
70900
.
A good set of wire strippers are
required to strip wire properly. This
style of wire stripper is ideal for this
harness install because of its ability to
properly strip wire gauges 10 thru
20.These are available from just about
any local auto part store, electrical
supply shop, home improvement store
or can be purchased online.
