11
Step 13: After routing the Switch Panel Wires to the Fuse/Relay
Center’s Switch Control Wires, cut the Switch Panel Wires and
loom to length. Secure the end of the loom with a zip-tie
(provided) or a large piece of heat-shrink (not provided).
Step 14: Strip each of the Switch Panel Wires
3
∕
16
”
, and install a male
pin terminal from the parts kit onto the end of each wire. See
page 7
for detailed instructions of how to properly crimp these
terminals. We recommend
Painless #70900 Roll-Over Crimpers
.
