SCAHTUM-03
12
SCA 1200HT User Manual
The tank area is used to hold the liquid and it is where the parts are cleaned. The SCA
improves part cleaning by circulating the liquid in the tank.
The Large Parts Basket is used to hold parts during cleaning and to
lift parts out of the tank. Users should wear thermal gloves when
lifting the basket from the tank.
The Small Parts Basket is used to hold small parts
during cleaning.
The Strainer over the drain opening in the tank
prevents debris from entering the drain when the
tank is emptied. It should be rinsed after emptying
the tank before refilling with fresh liquid.
The Heater is located behind the perforated Heater Shield. It heats the water in the tank.
The Spray Nozzle directs the flow of liquid into the tank. The spray nozzle can be removed
for cleaning if the holes are clogged. Simply unscrew the nozzle and rinse with tap water
to un-clog holes.
The Pump Intake Screen prevents large particulates from entering the pump. It may
occasionally need to be cleaned with a soft brush or toothbrush to remove debris trapped
in the holes.
The Temperature and Level sensors are used to sense the temperature and height of the
liquid in the tank. They are mounted behind the rear support bracket.
Figure 4: Small
Parts Basket
Figure 3: Large Parts
Basket
