PADT SCA 1200 HT, User Manual

Page: 6 / 29

SCAHTUM-03
6 SCA 1200HT User Manual
3: Safety Warnings
READ ALL INSTRUCTIONS BEFORE OPERATING
WHAT TO DO WHAT NOT TO DO

Always wear thermal gloves and safety
glasses when working near the unit or
when touching any part of the unit.

Always keep this manual near the unit.

Always place unit on a flat, stable
surface.

Always wipe away any cleaning solution
spilled near the control panel.

Always locate the unit away from
locations where it might be bumped.

Always unplug the unit from the wall
when not in regular use.

Always use the power cord supplied by
the manufacturer.

Always make sure that the power plug
receptacle is easily accessible.

Always unplug the unit from the wall
when it is being cleaned, moved or
serviced in any way.

Always connect the device to a power
receptacle with a protective ground.

Always change the cleaning solution as
recommended in this manual.

Always clean the unit with mild soap and
a sponge or rag. Rinse tank completely
before refilling.

Always stand upright with your head
away from the tank when opening the lid
to avoid vapors.

Always remove some liquid from the
tank before adding large parts to avoid
overflow.

Always operate the unit in a well-
ventilated location.

Always operate within environmental
temperature range of 10 to 30 degree C.

Do not use the SCA for any purpose
other than removing Soluble Support
Technology (SST) material from parts
created on Stratasys 3D Printers.

Do not allow aluminum, zinc or acids to
come into contact with the WaterWorks
cleaning solution. WaterWorks cleaning
solution contains Sodium Hydroxide.

Do not use any liquid other than water
and Stratasys cleaning solution
products in the unit.

Do not add more than the recommended
amount of cleaning solution to the unit.

Do not overfill the unit.

Do not allow the fluid temperature to
exceed 85ºC (185ºF).

Do not clean the unit with solvents.

Do not immerse the unit in liquid of any
kind.

Do not operate the device if there are
any doubts regarding safe operation due
to the outer appearance (e.g. damages)
of the system or the operating
environment.

Do not operate the unit until you have
read this manual and understand all
aspects of the unit’s operation.

Do not move the unit until you are
certain that it is cool and all liquid has
been drained from the unit.

Do not operate the unit unless the water
level is above the low liquid level
indicator mark.

Do not operate the unit dry.