5S-P-003
Program Writer
© Copyright 2022, PADAUK Technology Co. Ltd
Page 31 of 34
5S-P-003-UM-EN-V007
– Oct. 14, 2022
Ver not match.
IC version does not match
Please update the latest writer
version
Service Call
Hold reboot-SW and Repower on
Writing procedure failure
Press SW3 on the back cover, after
power on again, connect IDE
software update writer
E00: SYS-PWR NG
Power self-test failed
Please contact FAE
VPP Power fail
VDD Power fail
Failed to increase writing
voltage
Please replace IC, if this continues to
occur, please contact FAE
Board/IDE ver.
mismatch(xxx"
Burning self-test failed
Please contact FAE
Buzzer sound table
：
Buzzer sound
Introduction
Exclusion and Solutions
1 long beep
Writing failed
Check IC and exclude the
possible situation
Continuous short beep (about
6sec)
The IC writing signal has been
interrupted abnormally;
IC has been removed;
IC has been forced out by
Semi-automatic Writing Handler
Checking the settings of
Semi-automatic Writing Handler
writing time
5 consecutive short beeps
every 5 seconds
Press and hold the writing button
continuously but not release it
Check whether the burning button
is stuck
