5S-P-003
Program Writer
© Copyright 2022, PADAUK Technology Co. Ltd
Page 10 of 34
5S-P-003-UM-EN-V007
– Oct. 14, 2022
2.1. Steps of loading File
(1) Load PDK file from PC to Program Writer.
(2) Related information of PDK file would be displayed after loading successfully.
(i.e. Check Sum, file name …)
(3) After loading successfully, the JUMPER position and IC placement would be prompted.
(4) The LCM also displays the messages and prompts synchronously.
(5) Users could also unplug the USB cable and write in alone mode after the file loaded successfully.
(6) Users should make sure that JUMPER & IC had been put in the correct position before starting
『
Blank
Check
』、『
Verify
』、『
Read & Search
』
and
『
Auto Program
』
actions.
(7) About JUMPER & IC placement position, please refer to
『
JUMPER Description
』
.
(8) When JUMPER & IC have been placed, the Program Writer
’s LCM displays "IC ready".
