PADAUK 5S-P-003, User Manual, Page: 30 / 34

5S-P-003
Program Writer
© Copyright 2022, PADAUK Technology Co. Ltd
Page 30 of 34 5S-P-003-UM-EN-V007
– Oct. 14, 2022
8. Writer LCM Information and Buzzer Sound Table

Writer LCM information:
LCM information Descriptions Exclusions and Solutions
Wait : Load File .PDK file was not loaded Load .PDK file after connect to USB
No support…
Writing files is not supported
remove. IC has been removed
IC ready. IC is prepared
<<< IC O.K. >>> Check empty, verify or writing
complete
Insert:JP? Failed to detect JUMPER Please recheck JUPMER
IC O/S test fail
O/S: P? Open
O/S: P? Short
O/S: P? Leak
O/S: Fail
IC Open/Short test failed
Please replace IC or
remove and put it again or
check Jumper, connecting board and
settings again.
Leak test fail IO test fail (PMS150G only) Please replace IC
IC Shift:? Tips IC placement
Do Check...
Do Erase..
Do Program...
Do Verify...
Do Adjust IHRC..
Do Protect...
IC is being checked
IC is being erased (MTP only)
IC is being written
IC is being verified
IC is being adjusted
IC is being protected
Find a diff. IC. IC model does not match the
writing file
Please replace IC
IC not match. IC
’s content does not match
Please replace IC
Over program cnt Write failed, more than
written
Please replace IC
IC Over Current Writing failed, over current
occurred
Please replace IC
Over PGM limit Exceeded writable limit of
writer
Reload the .PDK file
IC not work(xx) Writing failed, unable to work Please replace IC
IC Invalid IC identify failed Please replace IC
IC Ver mismatch IC/PDK identify failed Please replace IC or update IDE
IC Erase fail. Erase failed Please replace IC
IC Blank Blank IC
IC not blank. Not blank IC Please replace IC
IC verify fail. IC verify fail Please replace IC
Loss PC Rolling. Rolling code synchronously
failed
USB reconnect, writing software
re-execution
lose trim data Invalid IC correction value Please replace IC
Loss IC pkg info Invalid packing definition Please check the package definition
in the source code